ptfe AD350,玻璃纤维增强材料PTFE,电气/电子应用领域PTFE,家电部件PTFE


ptfe AD350,玻璃纤维增强材料PTFE,电气/电子应用领域PTFE,家电部件PTFE
Arlon® AD350


Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.

The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.

Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.


材料状态 • 已商用:当前有效  
供货地区 • 北美洲 • 欧洲 • 亚太地区
填料/增强材料 • 玻璃纤维增强材料  
性能特点 • 尺寸稳定性良好 • 生产阶段,快 
用途 • 电气/电子应用领域 • 家电部件 
形式 • 颗粒料  
物理性能  额定值 单位制 测试方法
比重  2.40g/cm³ ASTM D792A
吸水率 (23°C, 24 hr)  0.070% ASTM D570
机械性能  额定值 单位制 测试方法
拉伸模量   ASTM D638
23°C 2  3560MPa 
23°C 3  4870MPa 
弯曲模量 (23°C)  3720MPa ASTM D790
压缩模量  2520MPa ASTM D695
薄膜  额定值 单位制 测试方法
抗张强度   ASTM D882
MD: 屈服  144MPa 
TD: 屈服  119MPa 
剥离强度 4  -2.5kN/m Internal Method
热性能  额定值 单位制 测试方法
导热系数 (100°C)  0.24W/m/K ASTM C177
Coefficient of Linear Thermal Expansion   
X Axis: 0 到 100°C  0.000012cm/cm/°C Internal Method
Y Axis: 0 到 100°C  0.000015cm/cm/°C Internal Method
Z Axis: 0 到 100°C  0.000095cm/cm/°C 
电气性能  额定值 单位制 测试方法
表面电阻率  4.5E+7ohm Internal Method
体积电阻率  1.2E+15ohm•cm Internal Method
介电常数 (23°C)  3.50 Internal Method
耗散因数 (10.0 GHz)  0.0030 Internal Method
耐电弧性  > 180sec ASTM D495
可燃性  额定值 单位制 测试方法
UL 阻燃等级  V-0 UL 94
补充信息  额定值 单位制 测试方法
Breakdown Voltage  > 45000V ASTM D149



1 / 2

Arlon® AD350 2012年9月29日
1 一般属性:这些不能被视为规格。

2 TD

3 MD

4 After Thermal Stress





























2 / 2